Mechanical Spring Dock Leveler 14T/10T – Pit-Style Spring Counterbalanced Dock Leveler

The HRML Mechanical Spring Dock Leveler is a pit-style dock leveler with 14 t (30,900 lb) / 10 t (22,000 lb) capacity, +300/−198 mm (+11.8″/−7.8″) range and ≥ 200,000-cycle design life — powered entirely by spring counterbalance, no electricity needed.
View all Mechanical Dock Leveler models →

SKU: HRML-14T 分类:
分享您的喜爱

Mechanical Spring Dock Leveler – Pit-Style, Zero Power

The HRML Mechanical Spring Dock Leveler is a pit-installed dock leveler that works entirely on spring counterbalance — no motor, no hydraulic power pack, no wiring. The operator lifts the deck with the pull chain, the springs carry the deck weight, and the hinged lip extends onto the trailer bed. When the work is done the deck stores flush with the dock floor and the pit is closed off by the automatic counterweight-lip tube, so forklift traffic and dock seals are never obstructed.

Two load ratings are available: the HRML-14T (14 t / 30,900 lb) with a 2,438 mm (8’0″) × 1,799 mm (70.8″) deck, and the HRML-10T (10 t / 22,000 lb) with a 2,210 mm (7’3″) × 1,830 mm (72″) deck. Both are engineered for ≥ 200,000 duty cycles with ≥ 99% availability, and the powder-coated finish stands up to daily wash-down and outdoor dock exposure.

🕑 Quick Specs at a Glance
Capacity: 14 t (30,900 lb) / 10 t (22,000 lb)  |  Working Range: +300 / −198 mm (+11.8″ / −7.8″)  |  Lip: 400 × 14 mm (15.7 × 0.55 in)  |  Pit Depth: 500 mm (19.7 in)  |  Raise Time: ≤ 16 s  |  Model: HRML-14T / HRML-10T

Key Features

  • Spring counterbalance, zero power – heavy tension springs do the lifting; works through power cuts with no electricity or hydraulics to maintain
  • 14 t / 30,900 lb top rating – covers heavy forklift + load combinations with the recommended 1.5× safety factor
  • ≥ 200,000 cycles design life – roughly 3× the entry-level pit leveler specification, with ≥ 99% availability
  • 8 mm (0.31 in) checker plate deck – anti-slip, self-draining, fully welded underside stiffeners
  • 14 mm (0.55 in) hinged lip – 400 mm (15.7 in) lip on a full-width hinged lip tube; overlap on the trailer bed ≥ 100 mm (4″)
  • Safety blow-off valve – if a truck departs early, the lip blows off and the deck retracts instead of hanging the trailer
  • Integral side guards – full-length toe guards close the deck edges; no exposed pinch points
  • Powder coated finish – blast-prepared steel, baked powder coat; custom colour on request

Model Range & Specifications

ModelRated LoadDeck WidthDeck LengthDeck Height
HRML-14T14,000 kg (30,900 lb)1,799 mm (70.8 in)2,438 mm (8’0")490 mm (19.3 in)
HRML-10T10,000 kg (22,000 lb)1,830 mm (72 in)2,210 mm (7’3")480 mm (18.9 in)

Pit depth is 500 mm (19.7 in) for both models; pit formwork dimensions are issued with the installation drawing. Deck width can be customised to the dock door size.

General Parameters

ParameterValue
Working range+300 mm above / −198 mm below dock level (+11.8″ / −7.8″)
Raise time≤ 16 s by pull chain (spring-assisted)
Pit depth+500 mm (19.7 in) recess below finished floor
Deck plate8 mm (0.31 in) anti-slip checker plate
Lip400 mm (15.7 in) long × 14 mm (0.55 in) thick, hinged lip tube
Main frameRectangular tube frame; base frame of welded 10# channel steel
OperationSpring counterbalance + pull chain; no power connection required
SafetyBlow-off valve (early departure protection), full-length side toe guards, maintenance strut
FinishPowder coated; colour customisable
Duty rating≥ 200,000 cycles; availability ≥ 99%
Working temperature−30 to +50 ℃ (−22 to +122 ℉)
BumpersLaminated rubber dock bumpers 300×200×100 mm (11.8×7.9×3.9 in) supplied with the pit set

Installation & Pit Work

The leveler is set into a cast concrete pit 500 mm (19.7 in) deep. Pit dimensions are issued as a formwork drawing before order confirmation. The frame is levelled, anchor-bolted and welded to the pit embedment angles, then the deck is commissioned by adjusting spring tension equally on both sides. Because the unit is purely mechanical, no electrical contractor or hydraulic commissioning is needed — installation is typically completed in one shift per bay.

Retrofit into existing pits of other brands is possible; send pit drawings for a fit check.

Maintenance Schedule

IntervalMaintenance Items
MonthlyClean the pit; grease hinge and lip tube pins; check spring bolts and chain condition
QuarterlyInspect welds, deck and lip for deformation; verify blow-off valve function and safety labels
AnnuallyRe-torque fasteners; adjust spring tension equally; full function test at +300 and −198 mm

Application Scenarios

🏢 Power-Unstable Sites
Loading continues through blackouts — no electricity needed at the dock.
🚚 High-Turnover Warehouses
14 t rating and 200,000-cycle design life suit multi-shift forklift traffic.
❄ Cold-Chain & Outdoor Docks
Powder-coated steel and sealed hinges handle wash-down and weather.
📦 Retrofit Projects
Fits standard 500 mm pits; custom pit drawings for new builds.

Frequently Asked Questions

What is a mechanical spring dock leveler?

It is a pit-style dock leveler whose deck and lip are moved by heavy tension springs and a pull chain instead of a hydraulic power pack. It needs no electricity, making it popular where power supply is unstable or maintenance budgets are tight.

How is it different from an edge of dock leveler?

A mechanical spring dock leveler sits in a 500 mm pit and gives a wide working range (+300/−198 mm) with full-length side guards; an edge of dock leveler face-mounts at the dock edge with no pit and a smaller range (±125 mm). See our Mechanical Edge of Dock Leveler for the no-pit option.

What happens if the truck pulls away early?

The safety blow-off valve releases the lip and the deck retracts into the pit, protecting both the leveler and the trailer from structural damage. The unit is reset in seconds.

Can it be converted to hydraulic later?

The pit geometry is standard, so a hydraulic dock leveler of the same size can be retrofitted later. For powered operation today, see our Hydraulic Dock Leveler 10T.

Get in Touch

📞
Get a Quote
Send your dock drawings & get pricing within 1 business day

Contact Us →

👥
Custom Sizing
Different capacity, size or finish? We manufacture to spec

Get Custom Quote →

🔍
Browse the Range
Compare all models in this category

View Mechanical Dock Leveler →

You may also like: Hydraulic Dock Leveler 10T  |  Mechanical Edge of Dock Leveler  |  Telescopic Hydraulic Dock Leveler 10T

评价

目前还没有评价

成为第一个“Mechanical Spring Dock Leveler 14T/10T – Pit-Style Spring Counterbalanced Dock Leveler” 的评价者

您的邮箱地址不会被公开。 必填项已用 * 标注

Secure Payments
Tellus gravida ipsum aut facilisis tempus at et aliquam estsem.
Free Shipping
Non pulvinar aenean ultrices lectus vitae imperdiet aeu.
24/7 Support
Nullam iaculis vestibulum arcu id urnain pellentesque quis.
Gifts & Sales
Aliquet ullamcorper leo mi vel sit pretium euismod eget libero.