🏠 Home
›
Mechanical Dock Leveler
›
Mechanical Spring Dock Leveler
Mechanical Spring Dock Leveler – Pit-Style, Zero Power
The HRML Mechanical Spring Dock Leveler is a pit-installed dock leveler that works entirely on spring counterbalance — no motor, no hydraulic power pack, no wiring. The operator lifts the deck with the pull chain, the springs carry the deck weight, and the hinged lip extends onto the trailer bed. When the work is done the deck stores flush with the dock floor and the pit is closed off by the automatic counterweight-lip tube, so forklift traffic and dock seals are never obstructed.
Two load ratings are available: the HRML-14T (14 t / 30,900 lb) with a 2,438 mm (8’0″) × 1,799 mm (70.8″) deck, and the HRML-10T (10 t / 22,000 lb) with a 2,210 mm (7’3″) × 1,830 mm (72″) deck. Both are engineered for ≥ 200,000 duty cycles with ≥ 99% availability, and the powder-coated finish stands up to daily wash-down and outdoor dock exposure.
Capacity: 14 t (30,900 lb) / 10 t (22,000 lb) | Working Range: +300 / −198 mm (+11.8″ / −7.8″) | Lip: 400 × 14 mm (15.7 × 0.55 in) | Pit Depth: 500 mm (19.7 in) | Raise Time: ≤ 16 s | Model: HRML-14T / HRML-10T
Key Features
- Spring counterbalance, zero power – heavy tension springs do the lifting; works through power cuts with no electricity or hydraulics to maintain
- 14 t / 30,900 lb top rating – covers heavy forklift + load combinations with the recommended 1.5× safety factor
- ≥ 200,000 cycles design life – roughly 3× the entry-level pit leveler specification, with ≥ 99% availability
- 8 mm (0.31 in) checker plate deck – anti-slip, self-draining, fully welded underside stiffeners
- 14 mm (0.55 in) hinged lip – 400 mm (15.7 in) lip on a full-width hinged lip tube; overlap on the trailer bed ≥ 100 mm (4″)
- Safety blow-off valve – if a truck departs early, the lip blows off and the deck retracts instead of hanging the trailer
- Integral side guards – full-length toe guards close the deck edges; no exposed pinch points
- Powder coated finish – blast-prepared steel, baked powder coat; custom colour on request
Model Range & Specifications
| Model | Rated Load | Deck Width | Deck Length | Deck Height |
|---|---|---|---|---|
| HRML-14T | 14,000 kg (30,900 lb) | 1,799 mm (70.8 in) | 2,438 mm (8’0") | 490 mm (19.3 in) |
| HRML-10T | 10,000 kg (22,000 lb) | 1,830 mm (72 in) | 2,210 mm (7’3") | 480 mm (18.9 in) |
Pit depth is 500 mm (19.7 in) for both models; pit formwork dimensions are issued with the installation drawing. Deck width can be customised to the dock door size.
General Parameters
| Parameter | Value |
|---|---|
| Working range | +300 mm above / −198 mm below dock level (+11.8″ / −7.8″) |
| Raise time | ≤ 16 s by pull chain (spring-assisted) |
| Pit depth | +500 mm (19.7 in) recess below finished floor |
| Deck plate | 8 mm (0.31 in) anti-slip checker plate |
| Lip | 400 mm (15.7 in) long × 14 mm (0.55 in) thick, hinged lip tube |
| Main frame | Rectangular tube frame; base frame of welded 10# channel steel |
| Operation | Spring counterbalance + pull chain; no power connection required |
| Safety | Blow-off valve (early departure protection), full-length side toe guards, maintenance strut |
| Finish | Powder coated; colour customisable |
| Duty rating | ≥ 200,000 cycles; availability ≥ 99% |
| Working temperature | −30 to +50 ℃ (−22 to +122 ℉) |
| Bumpers | Laminated rubber dock bumpers 300×200×100 mm (11.8×7.9×3.9 in) supplied with the pit set |
Installation & Pit Work
The leveler is set into a cast concrete pit 500 mm (19.7 in) deep. Pit dimensions are issued as a formwork drawing before order confirmation. The frame is levelled, anchor-bolted and welded to the pit embedment angles, then the deck is commissioned by adjusting spring tension equally on both sides. Because the unit is purely mechanical, no electrical contractor or hydraulic commissioning is needed — installation is typically completed in one shift per bay.
Retrofit into existing pits of other brands is possible; send pit drawings for a fit check.
Maintenance Schedule
| Interval | Maintenance Items |
|---|---|
| Monthly | Clean the pit; grease hinge and lip tube pins; check spring bolts and chain condition |
| Quarterly | Inspect welds, deck and lip for deformation; verify blow-off valve function and safety labels |
| Annually | Re-torque fasteners; adjust spring tension equally; full function test at +300 and −198 mm |
Application Scenarios
Loading continues through blackouts — no electricity needed at the dock.
14 t rating and 200,000-cycle design life suit multi-shift forklift traffic.
Powder-coated steel and sealed hinges handle wash-down and weather.
Fits standard 500 mm pits; custom pit drawings for new builds.
Frequently Asked Questions
What is a mechanical spring dock leveler?
It is a pit-style dock leveler whose deck and lip are moved by heavy tension springs and a pull chain instead of a hydraulic power pack. It needs no electricity, making it popular where power supply is unstable or maintenance budgets are tight.
How is it different from an edge of dock leveler?
A mechanical spring dock leveler sits in a 500 mm pit and gives a wide working range (+300/−198 mm) with full-length side guards; an edge of dock leveler face-mounts at the dock edge with no pit and a smaller range (±125 mm). See our Mechanical Edge of Dock Leveler for the no-pit option.
What happens if the truck pulls away early?
The safety blow-off valve releases the lip and the deck retracts into the pit, protecting both the leveler and the trailer from structural damage. The unit is reset in seconds.
Can it be converted to hydraulic later?
The pit geometry is standard, so a hydraulic dock leveler of the same size can be retrofitted later. For powered operation today, see our Hydraulic Dock Leveler 10T.
Get in Touch
You may also like: Hydraulic Dock Leveler 10T | Mechanical Edge of Dock Leveler | Telescopic Hydraulic Dock Leveler 10T
🔗 Related Product Categories








评价
目前还没有评价