🏠 Home
›
Dock Accessories
›
Rubber Dock Bumper
Rubber Dock Bumper – Laminated Loading Dock Protection
The laminated rubber dock bumper is the sacrificial layer between thousands of trailer impacts a year and your dock face, pit leveler or edge of dock leveler. Reinforced rubber pads are punched from heavy belt stock and stacked on a steel mounting bracket: the laminated construction absorbs impact energy layer by layer, and individual pads can be replaced when worn — no cutting out a cast bumper.
Blocks are bolted to the dock face or to the leveler’s bumper brackets. Replace a bumper when its effective thickness wears down by more than about 25 mm (1″) — a flattened bumper transfers impact straight into the concrete, which is how dock edges crack in the first place.
Type: laminated reinforced rubber | Typical Block: 300 × 200 × 100 mm (11.8 × 7.9 × 3.9 in) | Mounting: steel bracket, bolt-on | Sizes: customisable | Model: HRDB-01
Key Features
- Laminated reinforced rubber – punched from heavy-duty belt stock; layered construction absorbs repeated trailer impacts
- Standard 300×200×100 mm block (11.8×7.9×3.9 in) – other heights and widths manufactured to order
- Steel mounting brackets – weld-on or bolt-on brackets; 400 mm (15.7 in) brackets available for leveler installations
- Replaceable pads – individual laminates can be swapped out; no need to replace the whole assembly
- All-weather compound – rubber compound resists ozone, sunlight, oil splash and dock wash-down
- Protects more than concrete – shields pit leveler front frames, edge of dock levelers and pit edges from direct impact
- Fast installation – four anchor bolts per bumper; templates supplied
- Replacement service – matching sizes for worn bumpers of any brand
Specifications
| Parameter | Value |
|---|---|
| Construction | Laminated reinforced rubber pads, steel-through mounting bolts |
| Typical block size | 300 × 200 × 100 mm (11.8 × 7.9 × 3.9 in); other sizes on request |
| Mounting | Steel bracket to dock face, pit formwork or leveler bumper bracket |
| Wear limit | Replace when effective thickness is worn ~25 mm (1 in) below nominal |
| Working temperature | Typical dock range; cold-store compound on request |
| Finish | Black rubber; galvanised or painted brackets |
| Standard supply | Bumper block(s) + mounting bracket + anchor set |
| Documentation | Installation template, material datasheet on request |
Bumper size is matched to the trailer fleet and dock height — send your dock drawing and we will size the bumper and bracket together with the leveler.
Choosing the Right Bumper
| Situation | Recommendation | Note |
|---|---|---|
| Standard trailer docks with pit or edge-of-dock levelers | 300×200×100 mm laminated block on leveler brackets | Most warehouse docks |
| Rough yards, frequent off-centre impact | Taller/wider laminated stack or extra blocks side by side | Impact spread over more rubber |
| Replacement of worn brand-X bumpers | Match existing bolt pattern and height | Send measurements for a quote |
Application Scenarios
High trailer turnover demands replaceable, layered impact protection.
Rubber compound keeps its elasticity at low temperature.
Bolt-on brackets upgrade dock faces during leveler installation.
Protects dock edges where forklifts and trailers share tight aprons.
Frequently Asked Questions
What is a laminated rubber dock bumper?
It is a dock impact protector made of stacked reinforced rubber pads bolted between steel plates. The layers absorb trailer impact energy and can be replaced individually when worn.
When should dock bumpers be replaced?
As a rule of thumb, replace the bumper when about 25 mm (1 in) of effective thickness has worn away — below that, trailer impact starts transferring directly into the dock structure.
Can you match my existing bumper size?
Yes. Send the height, width, depth and hole spacing of your current bumpers and we will supply a matching laminated block with the same bolt pattern.
Do bumpers come with brackets?
Standard supply includes the rubber block, steel mounting bracket and anchor set. Brackets can be weld-on or bolt-on, including the 400 mm brackets used with our dock levelers.
Get in Touch
You may also like: Dock Vehicle Restraint | Hydraulic Dock Leveler 10T | Edge of Dock Leveler
🔗 Related Product Categories









评价
目前还没有评价